Wireless networks

q  More and more networks are operating without cables, in the wireless mode.

q  Wireless LANs use high frequency radio signals, infrared light beams, or lasers to communicate between the workstations, servers, or hubs.

q  Each workstation and file server on a wireless network has some sort of transceiver/antenna to send and receive the data.

q  Information is relayed between transceivers as if they were physically connected.

q  For longer distance, wireless communications can also take place through cellular telephone technology, microwave transmission, or by satellite.

´  Wireless networks are great for allowing laptop computers, portable devices, or remote computers to connect to the LAN.

´  Wireless networks are also beneficial in older buildings where it may be difficult or impossible to install cables.

´  The two most common types of infrared communications used in schools are line-of-sight and scattered broadcast.

 Line-of-sight communication means that there must be an unblocked direct line between the workstation and the transceiver

´  If a person walks within the line-of-sight while there is a transmission, the information would need to be sent again.

´  This kind of obstruction can slow down the wireless network.

´   Scattered infrared communication is a broadcast of infrared transmissions sent out in multiple directions that bounces off walls and ceilings until it eventually hits the receiver.

´  Networking communications with laser are virtually the same as line-of-sight infrared networks.

Wireless standards and speeds

´  The Wi-Fi Alliance is a global, non-profit organization that helps to ensure standards and interoperability for wireless networks, and wireless networks are often referred to as WiFi (Wireless Fidelity). The original Wi-Fi standard (IEEE 802.11) was adopted in 1997.

´   Since then many variations have emerged (and will continue to emerge). Wi-Fi networks use the Ethernet protocol.

Standard	Max Speed	Typical Range
802.11a	54 Mbps	150 feet
802.11b	11 Mbps	300 feet
802.11g	54 Mbps	300 feet
802.11n	100 Mbps	300+ feet

Wireless Security

´  Wireless networks are much more susceptible to unauthorized use than cabled networks.

´  Wireless network devices use radio waves to communicate with each other.

´  The greatest vulnerability to the network is that rogue machines can "eves-drop" on the radio wave communications.

´   Unencrypted information transmitted can be monitored by a third-party, which, with the right tools , could quickly gain access to your entire network, steal valuable passwords to local servers and online services, alter or destroy data, and/or access personal and confidential information stored in your network servers.

´   To minimize the possibility of this, all modern access points and devices have configuration options to encrypt transmissions.

´  These encryption methodologies are still evolving, as are the tools used by malicious hackers, so always use the strongest encryption available in your access point and connecting devices.

´  ENCRYPTION:

´  WEP (Wired Equivalent Privacy) encryption can be easily hacked with readily-available free tools which circulate the internet.

´   WPA and WPA2 (WiFi Protected Access versions 1 and 2) are much better at protecting information, but using weak passwords or passphrases when enabling these encryptions may allow them to be easily hacked.

´  If your network is running WEP, you must be very careful about your use of sensitive passwords or other data.

´  Three basic techniques are used to protect networks from unauthorized wireless use.

´   Use any and all of these techniques when setting up your wireless access points:

´  Encryption.

´  Enable the strongest encryption supported by the devices you will be connecting to the network. Use strong passwords (strong passwords are generally defined as passwords containing symbols, numbers, and mixed case letters, at least 14 characters long).

´  Isolation.

´  Use a wireless router that places all wireless connections on a subnet independent of the primary private network.

´  This protects your private network data from pass-through internet traffic.

´  Hidden SSID.

´  Every access point has a Service Set IDentifier (SSID) that by default is broadcast to client devices so that the access point can be found.

´   By disabling this feature, standard client connection software won't be able to "see" the access point.

´  However, the eves-dropping programs  can easily find these access points, so this alone does little more than keep the access point name out of sight for casual wireless users.

Advantages of wireless networks:

´  Mobility - With a laptop computer or mobile device, access can be available throughout a school, at the mall, on an airplane, etc.

´   More and more businesses are also offering free WiFi access ("Hot spots").

´  Fast setup - If your computer has a wireless adapter, locating a wireless network can be as simple as clicking "Connect to a Network" -- in some cases, you will connect automatically to networks within range.

´  Cost - Setting up a wireless network can be much more cost effective than buying and installing cables.

´  Expandability - Adding new computers to a wireless network is as easy as turning the computer on (as long as you do not exceed the maximum number of devices).

Disadvantages of wireless networks:

´  Security - Be careful. Be vigilant. Protect your sensitive data with backups, isolated private networks, strong encryption and passwords, and monitor network access traffic to and from your wireless network.

´  Interference - Because wireless networks use radio signals and similar techniques for transmission, they are susceptible to interference from lights and electronic devices.

´  Inconsistent connections –

´  wireless connections are not nearly as stable as those through a dedicated cable.

´  Speed - The transmission speed of wireless networks is improving; however, faster options (such as gigabit Ethernet) are available via cables.

´  If you are only using wireless for internet access, the actual internet connection for your home or school is generally slower than the wireless network devices, so that connection is the bottleneck.

´  If you are also moving large amounts of data around a private network, a cabled connection will enable that work to proceed much faster.